|
The Tascam Digital Interconnect Format (TDIF) is a proprietary format connector defined by TASCAM that is unbalanced and uses a 25-pin D-sub cable to transmit and/or receive up to eight channels of digital audio between compatible devices. Unlike the ADAT lightpipe connection, TDIF uses a bidirectional connection, meaning that only one cable is required to connect the eight ins and outs of one device or another. The Initial specification available to implementers was called TDIF-1 Version 1.0. The first product with this connector was the TASCAM DA-88. That implementation did not include the ability to derive a word clock synchronization between the DA-88 and another TDIF-1 device, so a BNC WORD CLOCK connection was required as well.(cite: DA-88 users manual) Later TASCAM products included the ability to sync to the TDIF-1 connection, although that still excluded the DA-88. (cite:DA-38 users manual). Other manufacturers vary in their completeness of implementation.〔See (Mackie D8B FAQ )〕 The signal labelled "word clock" in the TDIF-1 spec is delayed 270 degrees (90 degrees advanced) with respect to the word clock visible from the BNC word clock output. This is because the TDIF-1 spec was derived from the digital audio transmitter of the NEC uPD6381 DSP used in the DA-88. The TDIF-1 Version 1.1 specification includes parity and other channel information bits. TDIF-1 Version 2.0 includes specification for double speed and quad speed (e.g. 96 kHz and 192 kHz) rates at reduced channel counts.〔See tascam.com DA-78HR or DA-98HR details〕 The TASCAM X-48 supports 96 kHz at full channel count over 6 TDIF-1 connectors, using a post Version 2.0 specification.〔See tascam.com X48 webpage〕 == Notes == 〔 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「TASCAM Digital Interface」の詳細全文を読む スポンサード リンク
|